Jetting for Husqvarna 2T 1.5



Publisher Description



Jetting for Husqvarna 2T - Easily set up Husqvarna's dirtbike carb. Get max performance in any condition.

This app will help you configure the carb of your 2 strokes Husqvarna dirt bike (TC, TE, TX) to improve its performance with no need of repair manual or owner's manual. Using weather conditions and your engine / carburator configuration, the app will show you a recommendation about jetting to your specific bike, so it can be useful to get a spot-on jetting configuration and adapt it to weather changes.

In order to get the weather values, the application can use the GPS to obtain the position and altitude, and the network connection to get the temperature, pressure and humidity from the nearest weather station. Nevertheless, the application can run without GPS and internet connection, in this case, the user must enter the altitude and weather data.

The application is made up of four tabs that are described next:
- Results: in this tab, the recommended main jet, needle type and clip position, pilot jet and air screw position are shown. These data are calculated depending on the weather conditions and the engine configuration introduced in the other tabs. In addition, this tab lets to make a fine tuning adjustment to adapt to a concrete engine and carburetor.
- Weather: you can set the values for current temperature, altitude, pressure and humidity. The values of this screen can be manually set or can be loaded by the application reading the data from the nearest weather station (from the GPS tab).
- Engine: you must set in this screen the information about the engine, that is, the year, model (Husqvarna TC, TE, TX) and carburator (Keihin, Mikuni). Besides, you can enter the oil mix ratio that you're using.
- GPS: this tab allows to use the GPS to get the current position and altitude, and connect to an external service to get the weather conditions of the nearest weather station (temperature, pressure and humidity).

The application can manage different measure units: meters and feet for altitude, ºC and ºF for temperatures, mb, hPa, inHg, mmHg for pressure.

The app includes the following Husqvarna two stroke, off-road motorbikes from 2014 to 2020 model years:
TC 65, TC 85, TC 125, TC 250, TE 125, TE 250, TE 300, TX 125 (2017+).
* Fuel injection engines are not supported, please be sure your engine use a carburator instead of fuel injection.

If you click in "More from developer" you can find the other carburation tools for 2 strokes & 4 strokes motocross, SX, MX, enduro, supercross, off-road race motorcycles: KTM, Yamaha YZ, Suzuki RM, Honda CR, Honda CRF, Kawasaki KX.

The app is valid for both PRO or beginners dirtriders.

PERMISSIONS:
The application needs the following permissions:
- Your location: it lets the application get the position and the altitude using the GPS to know which is the nearest weather station.
- Storage: it's used for storing the configuration preferences.
- Network communication: it's used for invoke the external service which provides the current weather conditions
- Phone calls (read phone state and identity): it allows to get the system identifier in order to validate the license status of the installed application.


About Jetting for Husqvarna 2T

Jetting for Husqvarna 2T is a paid app for Android published in the Recreation list of apps, part of Home & Hobby.

The company that develops Jetting for Husqvarna 2T is ISEnet. The latest version released by its developer is 1.5.

To install Jetting for Husqvarna 2T on your Android device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2023-10-03 and was downloaded 16 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Jetting for Husqvarna 2T as malware as malware if the download link to com.isenet.jettingforhusqvarna is broken.

How to install Jetting for Husqvarna 2T on your Android device:

  • Click on the Continue To App button on our website. This will redirect you to Google Play.
  • Once the Jetting for Husqvarna 2T is shown in the Google Play listing of your Android device, you can start its download and installation. Tap on the Install button located below the search bar and to the right of the app icon.
  • A pop-up window with the permissions required by Jetting for Husqvarna 2T will be shown. Click on Accept to continue the process.
  • Jetting for Husqvarna 2T will be downloaded onto your device, displaying a progress. Once the download completes, the installation will start and you'll get a notification after the installation is finished.



RELATED PROGRAMS
Our Recommendations






BarCode2D-PNG


Click stars to rate this APP!

Users Rating:  
  0.0/5     0
Downloads: 16
Updated At: 2024-03-22
Publisher: ISEnet
Operating System: Android
License Type: Paid